Configure the emulator using these settings:.This will display the available serial ports and if using a USB to serial adapter the name of the adapter should be displayed if the adapter is connected and the drivers properly installed. In Windows open the device manager then expand the “Ports (COM & LPT)” section. Confirm the COM port to use in the emulator:.Connect the cable to the workstation and the serial port on the front of the appliance.Serial emulator of your choice such as HyperTerminal, Putty etc.Note: If using a USB to serial converter ensure the drivers are installed in the workstation. Workstation computer with a serial port or USB to serial converter.The serial port is listed as number 2 in this diagram of the 8441 machine type The serial port is port 'A' on the far left of the appliance in these diagrams for the 7198/7198, 24 appliance types: 7199/7198/2426 (9005), 8436 IDG (9006) or 8441 IDGx2 came with RJ45 to serial cable and a USB to RJ45 cable.ġ) The 7198/7199 appliances have an RJ45 style serial portĢ) You CANNOT connect the RJ45 serial port to an ethernet port on the workstation.ģ) Only the serial port on the appliance can be used for the connection:.Serial cable that came with the appliance.To connect to the serial port on a WebSphere appliance
